Once we activate the arpeggiator/roller with
1/32...1/4
buttons, piano keys
buttons activate the notes sequences once pressed in a chord or activate
the drum rolls once we press the drum triggers
Select the next pattern on active track in the combination of buttons:
→
A...Z
buttons. Once the new pattern is selected, it will be launched once the
current one has finished playing its last step (or its full cycle in case of
pendulum or random directions)
Enter the menu items using the lower row of keys A to N and combination of
TEMPO + A...N
or
TEMPO
→
A...N
. Small hints are written near each of A...N
letters and correspond to various menu item group settings, which are
described in the MENU section below
Numerical input
0...9
with the upper row of
O/0...Z/9
buttons to enter the
exact parameter value along with the
VALUE-/+
incremental buttons
Save current pattern to another pattern (via combo
→
RECORD
→
A...Z
)
and also to load (open) or save one of 24 projects (via combo
→
LAST
STEP
→
A...Z
to load another project and
→
RECORD
→
LAST STEP
→
A...Z
to save current project into another project name cell).
TRANSPOSE / VALUE CHANGE BUTTONS
Initially
-OCT / OCT+
buttons are used to transpose the keyboard playing or
recording melodic
TRACKS 1/2/3
. Ground Control range is
10 OCTAVES
per each
melodic track so there are 4 octave shifts down to the lower range with
-OCT
button and 4 octaves shifts up to the higher range with
OCT+
button.
Combination with
TRACK 1/2/3 + TRA/-
buttons will shift currently
selected pattern by one octave up or down on each combo press.
VALUE +/-
buttons are also used to set values in various menu items
(incrementing up or down), for example changing the track’s step number via
Summary of Contents for GROUND CONTROL
Page 1: ...GROUND CONTROL FIRMWARE V 2 10 ...
Page 5: ...BLACK PANEL DESIGN NEW SILVER PANEL DESIGN ...
Page 6: ...INTERFACE ...
