Endorphines GROUND CONTROL, Manual

Page: 16 / 53

MUTE/SOLO BUS
Mute bus is a row of buttons, whose main function is to mute a certain track. In
addition, each of those buttons blink each time the note happens on that track
which is useful to monitor activity on the tracks.
ALL DRUMS button isn’t
blinking as we already have every drum trigger blinking with its own drum trigger.
By default, the mutes have NON-QUANTIZED action – i.e. they mute/unmute
instantly. However if we hold the MUTE button for 1 second, it changes its mute
action to
QUANTIZED : i.e. that track will stop or start its new cycle quantized to
the track’s pattern length. Use it on your musical choice – sometimes it is
important to enable some tracks instantly, however sometimes is good to queue
the mute for one or multiple tracks so it will be enabled or disabled at a certain
time.
ALL DRUMS button will mute/unmute immediately all the 8 drum triggers. After
ALL DRUMS unmute, manually muted before tracks will be remembered. You can
press any MUTE buttons at a time to mute certain channels at once. Muted tracks
are remembered once you save the project (

→ RECORD → RECORD ).
SOLO
TEMPO+MUTE BUS buttons acts as a momentary SOLO for the tracks. This
action works opposite to the mutes i.e. rest tracks will be muted and only
selected tracks will be enabled.
CLEARING THE PATTERN
Combination of single P ANY MUTE BUS buttons press will CLEAR the
notes/triggers on the selected track but will leave the pattern length unchanged.
Second
P SAME MUTE BUS press will clear the steps number of that
track to default 16 steps.