- 15 -
(1) Turn table
This can swivel the reel up to 300
゜
(Refer to Figure 15).
When turned, take care the fixed side hose is not put under excessive force or contacts the reel or
surrounding objects.
An arm type guide roller is required together with the turn table.
The fixing position varies depending on the drum width.
Confirm the model name indicated on the name plate, then check the drum code and width. Refer to
Section 3-1. "Model and specifications" (page 5).
Fix the turn table to the bracket with the enclosed 4 bolts and nuts referring to Figure 16.
Figure 15 Figure 16
(2) Arm type guide roller Figure 17
This is required when the reeling direction angle varies
during operation.
Attach the arm to the spindle and fix with the hexagon
socket head cap screw.
(3) Stopper (Hose the attached)
This will stop the hose at the attached location during a
winding operation when used with the arm type guide
roller.
(4) Drum stopper
The rotation of the drum can be locked at 90° intervals.
Pull the lever, turn the stopper and insert it in the hole
of the drum cover. Pull the lever and set it on the
shallow slit for releasing the lock.
(5) Ratchet device (Use for pulling the hose manually) Figure 18
This is used when the winding operation stops and the
hose is still paid out.
To stop the drum, pull out the hose slightly then let it
return.
To release the drum, pull out the hose so as to rotate
the drum by 1/4 turn.
Ｕ
ｐ
ｔ
ｏ
３
０
０
゜
Ｆ
ｏ
ｒ
ｄ
ｒ
ｕ
ｍ
ｃ
ｏ
ｄ
ｅ
ｏ
ｆ
２
Ａ
ｏ
ｒ
３
Ａ
Ｆ
ｏ
ｒ
ｄ
ｒ
ｕ
ｍ
ｃ
ｏ
ｄ
ｅ
ｏ
ｆ
２
ｏ
ｒ
３
Ｇｕｄｅ ｒｏｌｌｅｒ
Ａｒｍ
Ｓｐｉｎｄｌｅ
Ｈｅｘａｇｏｎ ｓｐｃｋｅｔ
ｈｅａｄ ｃａｐ ｓｃｒｅｗ
Ｄｒｕｍ ｃｏｖｅｒ
ｌｅｖｅｒ
Ｓｔｏｐｐｅｒ
Ｂｒａｃｋｅｔ
Copied
digital
data
from
http://www.endo-kogyo.co.jp/
