- 10 -
Figure 9
■
Winding side hose (Refer to Figure 9)
(1) Pass the hose through the drum part from the drum side.
(2) Connect the hose to joint.
NOTE: For hose without fitting, use and tie the sliding band.
Remove nipple for hose with fitting.
Then use seal tape around the screw part of hose fitting.
(Refer to 10)
Figure 10
■
Fixed side hose
(1) Attach the hose to spindle.
NOTE: For hose without fitting, use and tie the sliding band.
Remove nipple for hose with fitting.
Then use seal tape around the screw part of hose fitting.
(Refer to Figure 10)
Ｄｒｕｍ ｃｏｖｅｒ
Ｄｒｕｍ ｃｕｒｌ ｐａｒｔ
Ｊｏｉｎｔ
Ｓｐｉｎｄｌｅ
Ｆｉｘ ｓｉｄｅ ｈｏｓｅ
Ｗｉｎｄｉｎｇ ｓｉｄｅ ｈｏｓｅ
Ｗｉｔｈｏｕｔ ｆｉｔｔｉｎｇ
Ｗｉｔｈ ｆｉｔｔｉｎｇ
Ｈｏｓｅ
Ｈｏｓｅ
Ｎｉｐｐｌｅ
Ｈｏｓｅ ｂａｎｄ
Ｒｏｌｌ ｓｅａｌ ｔａｐｅ
Ｂｕｓｈ
Ｂｕｓｈ
Ｊｏｉｎｔ
Ｊｏｉｎｔ
ＹＲＭ００１６４７ａ
（１）Ｂｕｓｈ ｉｓ ａｔｔａｃｈｅｄ
ｂｙ ｓｐｅｃｉｆｉｃａｔｉｏｎｓ．
（２）Ｕｓｅ ｏｎｅ ｏｒ ｔｗｏ
ｈｏｓｅ ｂａｎｄｓ
ｂｙ ｓｐｅｃｉｆｉｃａｔｉｏｎ．
（１）
（１）
（２）
ＲＥＭＡＲＫＳ
Copied
digital
data
from
http://www.endo-kogyo.co.jp/
