WaterWell Manual Aquatic Treadmill
Supplemental Guide
Page 5 of 5
Endless Pools Inc.
3/2/2010
6.
Finally, install the suction cups into the holes in the bottom of the lip of the treadmill sides. A minimum
of four should be used, two in the front and two in the rear. Insert the suction cup into the larger portion
of the opening and push the suction cup into the smaller portion of the opening. Make sure that the tab
of the suction cup is facing out. This will allow you to more easily break the suction of the suction cup
should the treadmill need to be moved.
7.
Should the tension or alignment of the treadmill belt need adjustment, a 3/16” hex head wrench has
been provided. Turning the axle adjustment screw clockwise will increase the belt tension and turning
the adjustment screw counter-clockwise will decrease the belt tension. The rear axle should always be
parallel to the front axle.
Suction Cup Tab
Axle Adjustment
Screw
