WaterWell Manual Aquatic Treadmill
Supplemental Guide
Page 4 of 5
Endless Pools Inc.
3/2/2010
3.
Place the treadmill side onto the body so that the two holes in vertical face of the sides line up with the
two holes in the vertical face of treadmill body. The holes in the top lip of the face should also line up
with the top edge of the body. Use the provided stainless steel machine screws to attach the treadmill
side to the treadmill body. There will be a total of ten screws per side.
4.
Next, set the lower front support bar in place and align the holes in the vertical face of the side with the
holes in the end of the support bar. Use the provided stainless steel machine screws to attach.
5.
Flip the treadmill over and attach the other side to the body and repeat steps 3 and 4.
Front Hole in Vertical Face
Rear Hole in Vertical Face
