4. Installing the 3D Printer
04
4.1 Gantry Frame Installation
A.
Place the gantry frame in the slot of the base frame, and pre-lock it with two M5x45 hexagon socket head spring washer combination screws from the bottom to the top.
B.
Place the gantry frame in the slot of the base frame, and pre-lock it with two M5x45 hexagon socket head spring washer combination screws from the bottom to the top.
C.
Rotate the bottom component by 180° to ensure that the profiles on both sides are level. Use two M5x45 hexagon socket head spring washer combination screws to align
the holes on the left side to pre-lock the holes first, and then tighten to fix them.
D.
Rotate the bottom component by 180°, and tighten the screw on the right side.
To tighten the screw, put the short side of the wrench into the screw and secure it.
Bottom View
1
13
13
2
