21
MEASUREMENT PROCEDURES
Start the engine.
③
Battery System Test starts when detecting
a voltage change of the battery.
※
The screen shown right is displayed during
Battery System Test. (about 1 minute max)
Engine started?
YES
NO
※
If retest is necessary after Battery System
Test, the right screen is displayed.
※
Select
YES
and press
(ENTER) Key,
the
below left screen is displayed. Turn on the
air conditioner (maximum power) and head
lights (high beam) with an engine running,
then press
(ENTER) Key
. Retest starts.
※
Select
NO
and press
(ENTER) Key,
Battery System Test Result is displayed as
shown in Step
④
. (judgement is done with the measured value.)
Now testing the Battery
System…
Turn on air conditioner
and headlight into
maximum level.
Press Key.
Key Re‑test
Retest
④
When Battery System Test is completed,
Test Result screen is displayed as shown in
the right. Confirm Test Result with using
△
(UP SCROLL) /
▽
(DOWN SCROLL) Keys
.
LED Indication lights up depending on the
Test Result as follows.
・
Green LED lights up when the all test results are "Good".
・
Red LED flashes when engine startability is weakened.
・
Red LED lights up when the charging system is
weakened or both engine startability and charging
system are weakened.
[START PERFORMANCE TEST]
Good
Cranking 8.619 V
Start Performance
100 ％
BAD
GOOD
CHARGE
Green LED lights up when the
both of Battery System Test
Results are "Good"
