19
MEASUREMENT PROCEDURES
※
If the error message shown right is dis-
played, disconnect Battery Clips from the
battery and check about the following items.
①
Check for the battery and car
Make sure there are not any dirt or
abnormality on the battery terminals and
terminal cables.
Press
(ENTER) Key
, to move to "2. Battery System Test" on Page 20.
●
Do not pull Battery Clips forcibly when detaching from the battery.
It may damage the battery terminals.
CAUTION
Error
Restart the unit and
test again.
Check error point.
②
Check for
ET8636
Make sure there are not any dirt or abnormality on the metal part of battery clips and
clip cables.
※
Battery may be damaged if keeping getting errors in spite of checking above.
When the error message is kept displaying or measurement error is displayed even if
testing another battery, ask repair service to us, KAISE CORPORATION through your
local dealer.
※
When the test result is "Charge/Retest" or
"Replace", the message shown right is dis-
played. Select "YES" and press
(ENTER)
Key
, the test result is settled. Select "NO"
and press
(ENTER) Key
, the message:
"Please charge battery, and test it again." is
displayed as comment of test result.
Auxiliary charge
finished?
YES
NO
Do you want to exit?
YES
NO
※
Select "YES" when the test result is "Charge/Retest", the test result changes "Replace".
⑤
The message shown right is displayed
when selecting "Hybrid Auxiliary" at
"Industry", "Which Test Mode?" or "Testing
Mode?". Select "YES" and press
(ENTER)
Key
to go back to the Battery Voltage
Selection screen (Step
③
on Page 14).
Select "NO" and press
(ENTER) Key
to go
back to the Battery Test Result screen (Step
⑨
on Page 18).
