Endace DAG 9.2X2 User Manual Download Page 85

Page: 85 / 86

EDM01-36v10 DAG_9.2X2_Card_User_Guide - Version History

Version History

Version

Date

Reason

March 2010

First release. DAG 3.4.3 release.

March 2010

Removed IRIG-B - not in this release. Updated TDS info in time sync chapter.

Updated Dag card photo.

July 2010

Preliminary release. Added new photo of slotted PCI bracket. Added BFS support

(TR TERF, EPP v2, IRIG-B). New firmware image. Updated dagconfig tokens,

Statistics Eth and WAN, universal counters. Added transmit information. Added new

dagconvert section. Readable DUCK 9.2X2 example. New support section.

September 2010 4.0.1 release. Removed card architecture diagram. Added dagmem info. Changed

image name. Added daginf sections. Updated Setting up the FPGA section. Updated

dagconfig output. Updated dagrom options. Updated dagconfig tokens list. Updated

dagconfig options. Updated Universal counters.

April 2011

DAG 4.2 release. Added 1G Ethernet and WAN support. Some restructuring of

introductory sections. Updated Link Types, firmware images, transceiver types,

dagconfig outputs, dagconfig token list, dagconfig interface status printouts.

Updated TR-TERF CRC stripping topics. Updated DUCK output. Corrected Dagclock

output tables.

November 2011 Updated interface status tables.

December 2011 DAG 4.7.0 - Windows support. Added reference to EDM04-37. Added details of the

new Windows Server tools DAG Device and WinDAG Command Prompt. Added

details on allocating memory and updating drivers for Windows. Updated details for

the following DAG tools: dagconfig, dagsnap, dagbits, dagconvert, dagclock.

February 2012

Corrected typo in the Warning - Thermal Trip section.

May 2012

DAG 4.7.1 - Updated Windows support information. Added dagconfig default

information. Updated Optical modules information. Updated Optical Modules.

Updated copper transceiver information.

May 2012

DAG 4.2.2 release. Added TTR-TERF info, 10GBASE-ER line type, Pluggable copper

transceivers change to 1000 only, dagdetect options. Updated dagrom options,

dagconfig tokens list, dagconfig options, transmit description, dagclock options,

Status

Description

Preliminary

The products described in this technical document are in development and have yet to

complete final production quality assurance.

Released

The products described in this technical document have completed development and final

production quality assurance.

Summary of Contents for DAG 9.2X2























































































Search results

Summary of Contents for DAG 9.2X2

Reviews:

Related manuals for DAG 9.2X2

Brands by name

Popular brands

Endace DAG 9.2X2, User Manual

Search results

Summary of Contents for DAG 9.2X2

Reviews:

Related manuals for DAG 9.2X2

Brands by name

Popular brands