ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
50
packet during the fragmentation of data to be transmitted. If you set this value
too low, it will result in a bad performance.
RTS Threshold:
Default value is 2347. When the packet size is smaller than
the RTS threshold, the wireless router will not use the RTS/CTS mechanism to
send this packet.
Beacon Interval:
Default value is 100. This is the interval of time that this
wireless router broadcasts a beacon. A Beacon is used to synchronize the
wireless network.
DTIM Period:
Default value is 1. Enter a value between 1 and 255 for the
Delivery Traffic Indication Message (DTIM). A DTIM is a
countdown informing clients of the next window for listening to
broadcast and multicast messages.
Data Rate:
The “Data Rate” is the rate that this access point uses to transmit
data packets. The access point will use the highest possible
selected transmission rate to transmit the data packets.
N Data Rate:
The “Data Rate” is the rate that this access point uses to transmit
data packets for N compliant wireless nodes. Highest to lowest
data rate can be fixed.
Channel Bandwidth:
This is the range of frequencies that will be used.
Preamble Type:
The “Long Preamble” can provide better wireless LAN
compatibility while the “Short Preamble” can provide better
wireless LAN performance.