ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
73
Fill in the "
Local IP
", “
Protocol
”, “
Port Range
” and "
Description
" of the setting to
be added and then click "
Add
". Then this Port Mapping setting will be added into the
"
Current Port Mapping Table
" below. If you find any typo before adding it and want
to retype again, just click
<Reset>
and the fields will be cleared.
Remove Port Mapping
If you want to remove a Port Mapping setting from the "
Current Port Mapping
Table
", select the Port Mapping setting that you want to remove in the table and then
click
D<Delete Selected>
. If you want to remove all Port Mapping settings from the
table, click
<Delete All>
button. Click
<Reset>
will clear your current selections.
Click <
Apply
> at the bottom of the screen to save the above configurations.
- Port Forwarding (Virtual Server)
Use the Port Forwarding (Virtual Server) function when you want different
servers/clients in your LAN to handle different service/Internet application type (e.g.
Email, FTP, Web server etc.) from the Internet. Computers use numbers called port
numbers to recognize a particular service/Internet application type. The Virtual
Server allows you to re-direct a particular service port number (from the
Internet/WAN Port) to a particular LAN private IP address (See Glossary for an
explanation on Port number).