Encore 54MBPS WIRELESS LAN POCKET ACCESS POINT User Manual Download

Page: 72 / 81

7.7.2 Settings

This screen leads to save settings as a profile and load profiles for different
circumstances. User can also load the factory default settings, and run a setup
wizard to configure the router and router interface.

VPN Pass-Through:

Choose enable or disable on the PPTP or IPSec.

Save Settings:

Click to save the current configuration as a profile that user can

load when necessary.

Load Settings:

Click

“Browse”

and go to the location of a stored profile. Click

“Load”

to load the profile's settings.

Restore Factory Default Settings:

Click to restore the default settings. All

configuration changes user has made will be lost.

Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT


















































































Search results

Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Reviews:

Related manuals for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Brands by name

Popular brands

Encore 54MBPS WIRELESS LAN POCKET ACCESS POINT, User Manual

Search results

Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Reviews:

Related manuals for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Brands by name

Popular brands