Destination:
Defines the destination of the incoming packet that the rule is
applied to.
●
Interface:
Select which interface (WAN or LAN) the rule is applied to.
●
IP Range Start:
Type the start IP address that the rule is applied to.
●
IP Range End:
Type the end IP address that the rule is applied to.
●
Protocol:
Select the protocol (TCP, UDP, or ICMP) of the destination.
●
Port
Range:
Select the port range.
Add:
Click to add the rule profile to the table at the bottom of the screen.
Update:
Click to update information for the rule if user has selected a list item
and have made changes.
Delete:
Select a list item and click
“Delete”
to remove the item from the list.
New:
Click
“New”
to erase all fields and enter new information.
Priority Up:
Select a rule from the list and click
“Priority Up”
to increase the
priority of the rule.
Priority Down:
Select a rule from the list and click
“Priority Down”
to
decrease the priority of the rule.
Update Priority:
After increasing or decreasing the priority of a rule, click
“Update Priority”
to save the changes.
65
Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT
Page 1: ...54Mbps Wireless LAN Pocket Access Point USER MANUAL...
Page 23: ...Now the main menu screen is popup 20...
Page 41: ...PPPoE with a fixed IP address 38...
Page 42: ...PPTP 39...
