Encore 54MBPS WIRELESS LAN POCKET ACCESS POINT User Manual Download

Page: 19 / 81

MAC Filter:

MAC Filter function controls the MAC of the network devices that

are listed in this table for access authorization or denial. When MAC Filter is
enabled, by selecting the “

Enabled

” radio box, select one of two choices:

●

Only deny PCs with MAC listed below to access device

●

Only allow PCs with MAC listed below to access device

The maximum number of MAC addresses that can be stored is 50. User can
browse through the MAC address saved by selecting the drop-down box.

For any changes made in the security page, click “

Apply

” for the changes to be

effective.

3.6 Tools

Four functions are provided in this page, Backup, Restore Settings, Restore
default settings and Firmware Upgrade.

Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT


















































































Search results

Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Reviews:

Related manuals for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Brands by name

Popular brands

Encore 54MBPS WIRELESS LAN POCKET ACCESS POINT, User Manual

Search results

Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Reviews:

Related manuals for 54MBPS WIRELESS LAN POCKET ACCESS POINT

Brands by name

Popular brands