Encore Networks BANDIT III, Quick Start Manual

Page: 15 / 16

BANDIT III Hardware Description
Page 15
Go to
Table of
Contents
Go to
Top
Doc
Go to
List of
All Docs
Async/Sync PPP Frames to/from port
SLIP Frames to/from port
SDLC Emulation—
Terminal
1
Sending or receiving data
SDLC Emulation—Host
1
The host has a transport layer connection with a terminal listed
in the device table.
SDLC Routing Frames to/from port
Annex G Good frames are passing through.
Byte Sync Encapsulation Good frames are passing through.
X.25 Level II connection exists.
Telnet Terminal Data transfer in either direction
1. When using spoofed protocols such as SDLC, both LEDs can light up at the same time. On a terminal
unit, both LEDs may be lit if some terminals are responding and some are not. On a host unit, both LEDs
may light up if some terminals are being polled and some are not.
Table 1-7. BANDIT III Protocol Status LED Definitions
(Sheet 2 of 2)
Protocol Green Activity LED
Top Doc
Doc List
Module TOC