Doc. No: 01999929
Revision: C
1 of 10
Issue Date: 08/15/21
INSTALLATION
•
OPERATION
•
MAINTENANCE MANUAL
SHOWER SHELTER™
FIELD ASSEMBLED SHOWER STRUCTURE
PRODUCT DESCRIPTION
The Shower Shelter™ is a field assembled three sided wind break. A single model with optional accessories including area
lights, graphics and modesty curtain is available. The Shower Shelter™ instruction manual is included with each unit,
installation instructions regarding the kit accessories are included in each kit. The shelter is designed to be field fit to existing
emergency shower/eyewash equipment by locating the structure over or around the shower equipment.
FIGURE 1
(MODEL 01080024)
The shower equipment may be located in the right or left rear corner or the center in the rear of the structure. Thermaflow
®
’s
with 32” overhead section (w/drench hose) should be mounted in the rear corner only. Assembly of the enclosure will require
two people, approximately a 12’ x 12’ assembly/staging area and the tools as itemized in the manual. Approximate assembly
time is three man hours. The panel/clamp assemblies are designed to allow for thermal expansion, do not rigidly mount
panels.
NOTE: It is advisable to assemble the Shower Shelter™ framework and locate over/around the emergency shower
prior to assembly of panels as the water inlet through a panel (side or rear) will be determined by the shower water
supply inlet to the shelter orientation.
