background image

4. 

Repair and maintenance 
 

4.1. Repair 

The end-user shall not make any repairs on the device. Opening or removing the cover 
of the device by the end-user is life-threatening and strictly prohibited! 

The appliance may only be installed and repaired by a qualified electrician. Repairs may only be carried out by 
replacing the defective part. 
During the warranty period, repairs may only be carried out by a person authorized by the manufacturer. Notify 
the distributor or manufacturer of any damage with the device during the warranty period. 
 

Modification of the device in any form is strictly prohibited! 

WARNING! ALL RESPONSIBILITIES AND OBLIGATIONS OF THE MANUFACTURER AND DISTRIBUTOR CEASED 
WITH ANY MODIFICATION / CHANGE OF THE APPLIANCE BY THE END USER. 
 

4.2. Maintenance 

The device requires no maintenance other than regular (monthly) testing of the electric shock protection (RCB). 
 

4.3. Cleaning 

The outer cover of the appliance shall only be cleaned with a dry cloth. No other type of cleaning is required. 

Do not clean the device with wet cloth or with chemicals!

 

 

 

 

 

www.viatorpower.com 

 [email protected] 

 +36 30 95 24 003 

 

Summary of Contents for PLU-16-1












Reviews: