Users’ Manual
EAN-26 Digital inclinometer operation
Page
|
8
reels. Click on desired reel to connect. Once clicked on a reel, it will try to connect and a message window
will appear to acknowledge that phone is connecting to the reel. Figure 5.7 is showing an example of
Bluetooth connection screen. Phone gets connected to the reel after few seconds.
Bluetooth connection status can be seen on top right corner of the screen as shown in figure 5.8. Now we
can check system information to see reel, probe, Bluetooth and phone information.
4.1.5 System information
System information can be seen by pressing system info button from
main menu. It shows the information about reel, probe, Bluetooth
and phone. On pressing system info button from main menu, it will
show the inclinometer screen. We can choose to see other screens
by clicking navigation tabs.
4.1.5.1 Inclinometer information
Inclinometer screen shows the information about reel and the probe.
Figure 5.9 is showing an example of inclinometer screen of a reel. It
is showing the Reel’s battery voltage, serial number, model number,
firmware version of reel’s processor, reel’s connection time and
connectivity. It shows the probe’s serial number, model number,
firmware version of probe’s processor, probe’s connection time and
connectivity. Battery voltage can be useful for reel’s health
monitoring. It is recommended to get battery full charged before
going to the site.
4.1.5.2 Calibration information
Calibration screen shows the calibration information of the probe.
Figure 5.10 shows the calibration screen of a probe. It shows the Probe type vertical or horizontal, sensor
type, probe measurement units, probe length, probe calibration date, calibration factor for axis-A,
calibration factor for axis-B, offset value for axis-A and offset value for axis-B. These information is useful
for data verification.
Figure 5.6
Figure 5.7
Figure 5.8
Figure 5.9
