ENGLISH
NovaJet 800 Series Printer Quick Start Guide
19
As you load media, a sensor checks to ensure that the gap between the print
head and the media falls with a user-adjustable range. The default for this
range is .0506 to .1346 inches. If the printer senses that the gap is out of range,
it will display an error message on the front panel display. The printer will not
continue to load media until the platen is adjusted within tolerance.
➪
To load media on a NovaJet 880
1
Determine the media thickness.
2
Adjust the platen to the thickness of the media. (e.g. if the media is
one quarter inches thick, use the platen adjust handle to lower the
platen to one quarter inches on the scale.)
3
Use the previous section for instructions on loading roll or standard
sheet media. Load rigid media between the flattening rollers on the
back of the printer and wait for the auto load. If the media is less
than 60 inches, make sure you align to the left side of the flattening
rollers.
Note:
Do not feed roll media between the flattening rollers.
Feed roll media behind the flattening rollers.
