NovaJet 800 Series Printer Quick Start Guide
34
11 Wait 20 seconds for the ink pressure to stabilize. Remove the
cartridge from the carriage and remove the blue tape from the jet
plate area of the cartridge.
CAUTION! Do not tilt the cartridge up
higher than a 30 degree angle. This could cause the cartridge
to lose pressure.
Check for ink on the jet plate. Continuous bleeding of the jet plate
indicates a loss of vacuum in the cartridge or an air leak in the lines.
A small amount of ink can be cleaned off the jet plate by dabbing with
a moist, lint-free cloth.
12 Reinstall the cartridge back into the carriage.
13 Repeat for each ink delivery line being used.
14 Press
Utility Menu/Access Menu/Access Home
to return the
carriage to the service station. If you have shipping cap cartridges,
continue with step 15. If you have needle assembly cartridges, go to
step 20.
15 Print the color test as described later in this guide.
16 If all colors look fine, go on to step 20. If any color drops out, prime
cartridges as necessary, using the ink primer. Place the suction end
of the ink primer over the jet area of the cartridge.
Switch
Sight
Tube
