NovaJet 800 Series Printer Quick Start Guide
18
➪
To load sheet media
1
Press
Setup Menu/Paper Options Menu/Supply Type/Sheet
,
then press
OK
.
2
Load the sheet from the back of the printer, aligning it with the
alignment mark on the platen.
3
Make sure that the media is flat and under the rollers. After a few
seconds, the printer will automatically sense the media's presence
and load it until it reaches the start position on the platen.
!
When using sheet media, make sure you feed the media between the platen and
the dryer as printed images comes out the front of the printer.
Loading media on the NovaJet 880
You can use either roll or sheet media. To ensure straight paper loading and avoid
skewing, be sure to hold the media parallel to the platen. Use the load lines on the
platen as a guide to correctly align the media. Be sure to load from the back only.
Set the media guides to the width of the media.
The NovaJet 880 has an adjustable platen. The platen can be lowered to allow
for printing on media up to .5 inches thick. Below the front panel display you will
notice a round handle. This handle is used to adjust the printer's platen up or
down.
