Enbrel AutoTouch Connect, User Manual

Page: 27 / 44

Enbrel Mini ® single-dose
prefilled cartridge will not eject.
Reason #1 : If the viewing
window has no light, press the
status button to wake up
AutoTouch Connect
TM . Then press
and hold the door button for at
least two seconds to eject.
Reason #2 : If Enbrel Mini does
not eject automatically at the end
of an injection, there may be a
problem. Call 1-888-4ENBREL
(1-888-436-2735).
The purple cap is very hard to
remove.
The purple cap should not be
removed outside of the AutoTouch
Connect
reusable autoinjector. It
should be removed after it is
loaded into AutoTouch Connect,
when you are ready to inject. If
Enbrel Mini is loaded and the
purple cap is difficult to remove,
call 1-888-4ENBREL
(1-888-436-2735).
The injection speed will not
change during injection.
Once the injection starts, the
speed cannot be changed. Always
set the speed prior to injection.
The injection is faster or
slower than expected.
The speed switch may have been
moved unintentionally. Check the
speed setting prior to starting
each injection.