Enbrel AutoTouch Connect, User Manual

Page: 11 / 44

Status button
Press this button to begin an
injection. Lights will indicate the
status of your injection.
Green:
Ready to press and start injection.
Blinking green:
The needle is inserting and your
injection is in progress.
Red:
An error has occurred. See the
Troubleshooting section of this
manual.
Progress bar
These stacked green bars are fully
lit when your injection starts, and
the bar of lights decrease as your
injection is in progress. The lights
will disappear when your injection
is finished.
Speed switch
The AutoTouch Connect TM reusable
autoinjector allows you to choose
from three injection speeds. The
pre-set speed is medium.
(+) is faster
(•) is medium
( – ) is slower