EXTENSIBLE DOUBLE BEAM VIBRATING SCREEDS
en
10
1- PLUG 3Ph+Earth
2- CABLE TO SWITCH SECTION 2,5 mm2
3- CABLE TO SWITCH SECTION 2,5 mm2
4- CABLE TO SWITCH SECTION 2,5 mm2
5- EARTH CABLE (green-yellow)
6- EARTH CONNECTION POINT
7- SWITCH
8- CABLE FROM SWITCH TO MOTOR SECTION 2,5 mm2
9- CABLE DE INTER. A MOTOR SECCION 2,5 mm2 10- CABLE DE INTER. A MOTOR SECCION 2,5 mm2
11- TERMINAL BOX
12- MOTOR
13.- SWITCH BOX
6
LOCATING MALFUNCTIONS
PROBLEM
CAUSES/SOLUTIONS
The motor doesn’t work
Check the gas level
Check the gas admission key is open.
Check the de choke position (gas).
Check the power source (electric).
Check the cables, the switch and the plug electric.
The screed doesn’t vibrate
Check the oil level of the exciter
Check the exciter’s belt.
The electric motor is overheating
Check there is not dust inside the motor.
Check the power supply type.
7
INSTRUCTIONS TO ORDER SPARE PARTS
7.1 INSTRUCTIONS TO ORDER SPARE PARTS
1
.- Every spare parts order must include PART CODE NUMBER AS STATED IN THE PARTS LIST.
We recommend including the MACHINE SERIAL NUMBER.
2
.- The identification plate with serial and model number is located as shown in the point 2 of this
manual.
3
.- Let us to know the right shipping instructions, including the wished route, the address and the
consignee complete name.
4
.- Do not return the parts without authorisation, the return is done with freight prepaid.
7.2 INSTRUCTIONS TO REQUEST WARRANTIES
1.-
The warranty is valid for 1 year after the purchasing of the machine, the warranty will cover parts
with manufacturing defects. In any case the warranty will cover a malfunction due to improper usage
of the equipment.
2.-
In all warranty requests THE MACHINE MUST BE SENT TO ENARCO, S.A. or to an
AUTHORIZED DEALER, always including the complete address and name of the consignee.
3.-
The Technical Assistance Service will immediately notify to the customer if the warranty is
accepted and, if requested, it will send a technical report.
4.-
The warranty will be void if any equipment has been previously handled by personnel outside of
ENARCO, S.A. or not authorized by it.
NB:
ENARCO, S.A. reserves the right to modify any part of this manual without prior notice.
8-800-555-58-36
www.VibroMotors.ru
i
