Version
Document Title
Release Date
01
WT 2.1
–
Owner’s Manual
2021-03-12
3
P
RODUCT
O
VERVIEW
Enapter's Water Tank 2.1 (WT21) is a standardized, stackable, and flexible system to provide deionized
water to the electrolysers. The modular, easily maintainable design
–
paired with advanced software
integration
–
allows to set up the system in minutes, including remote control and management. To
have a water input at the right level of purification always available for your electrolysers, simply stack
this module inside standard 19" racks or any housing you wish.
Front Panel
Figure 1
The front panel of the WT 2.1 (Figure 1) includes all physical connections of the device
–
allowing easy
access for installers and maintenance staff, requiring access from only one direction, and simple
integration into standard 19" racks and cabinets.
1)
H
2
O In
1.
Bulkhead connector (10mm)
2.
Requirements: Water input conductivity <20 µS/cm, input pressure = 0 →
6 bar
2)
H
2
O Out
1.
Bulkhead connector (8mm)
2.
Output: max 3.8 L/min, up to 2.75bar
3)
Overfilling
1.
Bulkhead connector (10mm)
2
8
1
3
6
5
4
7
11.1
11.2
11.4
11.3
9
10
