Enabling Technologies Dynamique Biski, Owner'S Manual

Page: 35 / 44

DYNAMIQUE
[35]
Troubleshoot a Load System that is not Working Properly:
Working through the following steps in order will help you trouble shoot
your Load System in the most efficient and effective manner as possible.
Step 1)
Remove the seat to improve access to the Load System.
Step 2)
Check the tightness of the Shifter Lever’s main pivot bolt
11
.

If it is too loose, the Shifter Trigger
13
will over power the Shifter
Lever
12
and the Shifter Lever
12
will recoil out of whichever position it
is shifted towards reducing the Shifter Triggers
13
ability to tension
the Slide
15
.

If it is too tight, the Shifter Lever
12
will be too difficult to move.
If necessary, adjust the Shifter Lever’s main pivot bolt
11
with a 5/32” Allen
tool and 7/16” wrench.
Step 3)
Remove the gas struts
17
to improve visibility to the Load System.
Step 4)
Check the tightness of the Shifter Trigger
13
at the Shifter Lever
12
.

If it is too loose, the Shifter Trigger
13
will have vertical play. This
reduces the Shifter Trigger’s
13
ability to tension the Slide
15
.

If it is too tight, the Shifter Trigger
13
will not move freely
horizontally. This will cause binding while shifting.
If necessary, adjust the Shifter Trigger’s
13
bolt at the Shifter Lever
12
with a
5/32” Allen tool and 7/16” wrench.
Step 5)
Inspect the Slide Slot
14
for burs, notches or wear. Burs, notches and wear
can form for a variety of reasons. The most common reason is continued
operation of a ski that is not working 100% as intended.