ENA Micro 9 One Touch, Instructions For Use Manual, Page: 19 / 28

47
5 Maintenance
pt
es
nl
it
fr
ru
en
de
Precondition:
READY
is displayed.
k T
Press
and hold
the Rotary Switch until
RINSE
appears.
g T
Turn the Rotary Switch until
FILTER -
is
displayed.
k T
Press the Rotary Switch to enter the
programme item.
NO -
g T
Turn the Rotary Switch until
YES p
is
displayed.
k T
Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
T
Remove and empty the water tank.
T
Open the filter holder.
T
Insert the filter cartridge into the water tank,
exerting slight pressure.
T
Close the filter holder. It will click into place
audibly.
E
After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T
Fill the water tank with fresh, cold water and
reinsert it.
T
Place a receptacle (at least 500 ml) under the
hot-water spout.
c T
Press the Maintenance button.
FILTER RINSING
, water flows out of
the hot-water spout.
E
You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Maintenance button
c
, to continue with
rinsing of the filter.
E
The water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
HEATING
READY
The filter is now activated.
Changing the filter
E
After 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
E
After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E
If the CLARIS Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:
FILTER
/
READY
is displayed.
c T
Press the Maintenance button.
INSERT FILTER
T
Remove and empty the water tank.
T
Open the filter holder and remove the old fil-
ter cartridge.
T
Insert a new filter cartridge into the water
tank, exerting slight pressure.
T
Close the filter holder. It will click into place
audibly.
T
Fill the water tank with fresh, cold water and
reinsert it.
T
Place a receptacle (at least 500 ml) under the
hot-water spout.