42
4 Permanent settings in programming mode
k
T
Press the Rotary Switch to exit the pro-
gramme item.
PRODUCT
g
T
Turn the Rotary Switch until
EXIT
is
displayed.
k
T
Press the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
E
If you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to adjust the water hardness.
The water hardness can be adjusted on a continu-
ous scale between 1° dH and 30° dH.
Example:
Change the water hardness setting from
16°dH
to
25°dH
.
Precondition:
READY
is displayed.
k
T
Press
and hold
the Rotary Switch until
RINSE
appears.
g
T
Turn the Rotary Switch until
HARDNESS
is displayed.
k
T
Press the Rotary Switch to enter the
programme item.
16°dH
g
T
Turn the Rotary Switch until
25°dH
is
displayed.
k
T
Press the Rotary Switch to confirm the
setting.
OK
, the water hardness is set.
HARDNESS
g
T
Turn the Rotary Switch until
EXIT
is
displayed.
k
T
Press the Rotary Switch to exit programming
mode.
READY
Energy-saving mode
The energy-saving mode (Energy Save Mode,
E.S.M.
©
) helps you to prevent your machine from
consuming power unnecessarily and to actively
save energy:
U
ENERGY p
U
Soon after the last preparation, the ENA
stops heating up. After about 5 minutes the
message
ENERGY ON
is displayed.
U
Before you can prepare a speciality coffee,
speciality coffee with milk, or hot water, the
machine must heat up.
U
ENERGY -
U
The ENA is constantly ready for use.
U
All speciality coffees as well as hot water can
be prepared without having to wait.
Example:
Change the energy-saving mode from
ENERGY p
to
ENERGY -
.
Precondition:
READY
is displayed.
k
T
Press
and hold
the Rotary Switch until
RINSE
appears.
g
T
Turn the Rotary Switch until
ENERGY p
is
displayed.
k
T
Press the Rotary Switch to enter the
programme item.
ECONOMY p
g
T
Turn the Rotary Switch until
ECONOMY -
is displayed.
k
T
Press the Rotary Switch to confirm the
setting.
OK
, the energy-saving mode is set.
ENERGY -
g
T
Turn the Rotary Switch until
EXIT
is
displayed.
k
T
Press the Rotary Switch to exit programming
mode.
READY