ENA Micro 9 One Touch Instructions For Use Manual Download Page 10

38

2 Preparation

<

  

T

  Press the Espresso button to start prepara-

tion.

T

  Turn the grinder adjustment switch to the 

desired position 

while

 the grinder is 

running.
The preset amount of water flows into the 
cup. Preparation stops automatically.

READY

Filling the water tank  

Daily maintenance of the machine and hygiene 
when handling milk, coffee and water are key to a 
perfect coffee result in the cup every time. You 
should therefore change the water 

daily.

CAUTION

Milk, sparkling mineral water or other liquids can 
damage the water tank or the machine.

T

  Only fill the water tank with fresh, cold water.

T

  Remove the water tank and rinse with cold 

water.

T

  Fill the water tank with fresh, cold water and 

reinsert it.

2 Preparation 

 

E

You can interrupt preparation at any time 
while a speciality coffee, speciality coffee 
with milk or hot water is being prepared. 
Just press any button.

 

E

Before and during the grinding operation 
you can select the 

coffee strength

 of 

espresso 

<

, coffee 

>

, cappuccino 

/

 and 

latte macchiato 

(

 : 

NORMAL

STRONG

.

 

E

During preparation, you can change the 
preset 

amounts

 (e.g. amount of milk foam 

or water) by turning the Rotary Switch 

g

.

 

E

You can follow the current status of 
preparation on the progress bar.

Coffee tastes best served hot. A cold porcelain cup 
cools the beverage – and impairs the taste. We 
therefore recommend prewarming the cups. The 
full coffee aroma can develop only in prewarmed 
cups. You can purchase a JURA cup warmer from 
your specialised dealer.

You can make permanent settings for all products 
in programming mode (see Chapter 4 ‘Permanent 
settings in programming mode – Products’).

Espresso,  coffee    

Preparation of espresso 

<

 and coffee 

>

 follows 

this model.

Example: 

Proceed as follows to prepare one coffee.

Precondition: 

READY

 is displayed.

T

  Place a cup under the dual spout.

>

  

T

  Press the Coffee button to start preparation.

COFFEE

, the preset amount of water 

flows into the cup.
Preparation stops automatically.

READY

Latte  macchiato,  cappuccino     

Your ENA can prepare a latte macchiato or 
cappuccino at the touch of a button. There is no 
need to move the glass or cup.

Preparation of latte macchiato 

(

 and cappuccino 

/

 

follows this model.

Example: 

Proceed as follows to prepare one latte 

macchiato.

Precondition: 

READY

 is displayed.

T

  Place a glass under the dual spout.

T

  Remove the protective cover of the dual 

spout.

Summary of Contents for Micro 9 One Touch





























Reviews: