emz smart Sol Operating Instructions Manual Download Page 98

Page: 98 / 114

Page 98

1.4.1 Low-Flow

04. 07. 2015

10:38

Activation

T ON

60.0°C

1.4.2 Quick-charging

04. 07. 2015

10:38

Activation

Sensors

T ON

T OFF

T targ.Coll.

TS3

48.0°C
52.0°C
70.0°C

1.4.3 disable recha...

04. 07. 2015

10:39

NLU at solar yield

Activ.time progr.

Start

End

08:00

22:00

PROFESSIONAL MODE

Here, the switch-ON temperature

can be defined for low-flow plants.
Continue with ›Quick-charging‹.

If the plant has been designed accordingly

and a system involving disable recharge

selected, the appropriate parameters

are set here.
The recharge suppression during solar charg-

ing can be activated here.
Here, the time control and/or the temperature

control are activated - possible for all systems

with heating boiler control.
Time and temperature control

can be used in combination.
Select the time slot via ›Start‹ and ›End‹.
Continue to scroll.

Tank quick charging changes over from

dT control to fixed temperature control.
›T ON‹ and ›T OFF‹ define the

change-over range and ›T targ. Coll.‹

the fixed temperature on the collector.
An upper tank sensor is

required for quick-charging.
Continue with ›Disable recharge‹.

Summary of Contents for smart Sol



















































































































Search results

Summary of Contents for smart Sol

Reviews:

Related manuals for smart Sol

Brands by name

Popular brands

emz smart Sol, Operating Instructions Manual

Search results

Summary of Contents for smart Sol

Reviews:

Related manuals for smart Sol

Brands by name

Popular brands