Step 6: Connect the power cable
Plug the power cable into the DC IN jack, wait for about 3 seconds or
more, and then loosen your finger on the STANDBY button;
Firmware installation will start in about 30 seconds. The LED indicators on
the front panel will be enlightened and flashing during installation. If it is
connected to a TV set, a yellow install page will appear on the TV screen.
Please wait for about 10 minutes, the installation will be completed, the LED
indicators will go off, and the player will be powered off automatically. Then you can
press the STANDBY button to turn on the player and enjoy.
Note:
If install error or white screen occurs, please unplug the power cable and
try again;
Do not turn off the power during installation;
The USB Pen Drive is not allowed to be unplugged during installation.
11.2 Firmware Upgrade
Firmware upgrades can bring new features, improvements and bug fixes.