7
Utilities Using Guide
Basic Configuration
We highly recommend you that using “DFU” utility for the first
time setting of AP, and “AP Configuration” for latter regular
setting, (of course, you should already have a connect with AP
through the Ethernet cable). Because the DFU utility configures
the AP through USB port, it won’t care about any setting inside
the AP. So you can change any setting you need and make sure
what all the setting of AP are. After that, you may deploy the
AP in a not-easily-reachable working place, it is very
inconvenient to connect host PC and AP by USB cord, but it
should have an Ethernet cable to connected to.
For DFU
When you run the DFU, you will see a page like below.