9
1. First, set the field of “Eth_IP_Address”, that is the IP
address of this AP. You should make sure that the IP address
is a valid address in your sub-net.
2. Set the field of “Eth_SubMask”, that is the sub-net mask of
this sub-net. It should be the same with your sub-net.
3. Set the field of “Wirel_ESSID”, that is the Extended Service
Set ID (ESSID) of this AP. All wireless stations want to
connect with this AP must have the same ESSID.
4. Set the field of “Wirel_Channel”, that is the channel that this
service set using. If more than one service set on the same
channel, they will equal-share the same access. And we
recommend you that it’s better to depart from more than one
channel for adjacent using channels, e.g. using channel 6 and
channel 8 concurrently will be better for channel 6 and
channel 7.
After the above setting, the AP should work properly.