63
Advanced Users
Advanced Users
-Machine
={
machine name
|
IP address
}
•
This option specifies the machine to connect too.
•
If the machine name contains spaces then enclose the name in quotes, for example:
-machine=”My Computer”
•
You can also specify an IP address, for example:
-machine=10.0.0.21
•
-machine is not compatible with -layout.
If the server requires a User Name and Password the following options should be used:
-UserName
=
user name
Password
=
password
If the machine is not participating in a domain, the account must be on the machine you are connecting to.
If the machine is participating in a domain, you have a choice:
•
The account can be on the machine you are connecting to.
•
It can be an account on the domain.
If the account is on the domain, the domain name must be specified with the following option:
-Domain
=
domain name
-Port
=
port number
You need specify the port if you are attempting to connect to another machine and Wall Control-red has been configured to
listen on a port other than the default port.
A port number is any integer between 1 and 65535.
13.1.2 IP Camera
The command line interface allows you to create, modify or close IP-Camera windows. The command line interface can be
accessed in a number of ways:
•
From a shortcut specifying IPCAMCMD.EXE as the target followed by the command line options separated by spaces.
•
From a command prompt by specifying the full path of IPCAMCMD.COM or by having the folder where the IP-Camera
software was installed on the path.
•
From a batch file. The same rules as command prompt apply.
-ID
=
number
•
When a window is created it can be allocated an ID. To modify or close a window, specify its ID so the correct window is
modified or closed.
•
An ID is any integer between 1 and 65535. The ID is specific to IP-Camera windows.
