Cabling
33
Cabling
1
2
3
4
5
6
7
8
9
10
11
12
1-4
Output connectors on card 1 - For screens 1 - 4
5-8
Output connectors on card 2 - For screens 5-8
9-12
Output connectors on card 3 - For screens 9-12
Connect the graphic outputs to your monitors using DisplayPort cables. (Not supplied)
5.6.2 Changing the Order of the Screens
Changing the order in which the screens appear is possible using the
Vigi
Control application. Select
Screen Order
from the
Vigi
Control
Configure Menu
and in the displayed dialogue, click on the screens sequentially to establish the order you
require. For detailed information on changing the screen order, click on the
Help
button in the
Configure
Screen Order
dialogue.
5.6.3 Connecting the Control Screen (Optional)
Most
EMS
systems are configured to boot off the onboard graphics device therefore there may be a requirement to
connect a control screen. The control screen is a standalone VGA (VSN990 / VSN1190) or DVI-I (VSN970 / VSN1170) monitor
which is separate from the monitors on the display wall. The control screen is configured as the Primary monitor in the
Windows® Display Settings and the display wall is configured as the Secondary monitor.
Connect the control screen as follows:
Twelve Screen Display Wall
Corresponding Graphics Outputs
