17431 N. 25
th
Avenue - Phoenix, Arizona 85023
Phone: (623) 581-2875 - Toll Free: (800) 796-2875 - Fax: (623) 582-9499
[email protected] – www.emrcorp.com
PTT Active State:
Click the “Hi” radio button if a TTL level High (5 Vdc) signals the PTT is active.
Click the “Low” radio button if a TTL level Low (0 Vdc) signals the PTT is active.
Debounce:
Debounce should be selected if you experience false readings (usually not required).
Click the “Y” radio button to enable Debounce.
Click the “N” radio button to disable Debounce.
COR Sense Setup
By clicking on the Power Sensor & Tests PTT Link on the left frame of the web page the Power Sensor & Tests PTT
page is displayed (see Fig. 22). COR Sense can be set up on the COR Sense Setup table (see Fig 25).
The User can Enter/Program the following;
Enable/Disable:
Click the “Y” radio button to enable the COR Test Option.
Note: Only enable if the COR Sense Line is installed.
Click the “N” radio button to disable the COR Test Option.
COR Active State:
Click the “Hi” radio button if a TTL level High (5 Vdc) signals the COR is active.
Click the “Low” radio button if a TTL level Low (0 Vdc) signals the COR is active
17
Fig. 25
