28563-1-0511
Page 6
PrOPer INSTALLATION SeQueNce:
See Figure 1 for log placement illustration.
See Figure 2 for burner pin locations.*
Attention:
Do not use Log Placement pages to order replacement logs. Refer to Page 4, Parts List and Parts View to
order logs for your appropriate model number.
The following WARNING applies when log set is installed onto an unvented gas burner assembly.
wArNINg: This appliance is equipped for natural or propane gas. Field conversion is not permitted.
Before you begin: Do not, handle these logs with your bare hands! Always wear gloves to prevent skin irritation. After handling
logs, wash your hands gently with soap and water.
All Logs
The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if
the logs are not properly and firmly positioned in the appliance.
refer to Figure 1 for the following warning.
warning:
Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved
with this appliance may result in property damage or personal injury.
LOG PLACEMENT
Log Placement - OLX(24,30)wr-1 Logs
Figure 1
Burner Pin Location
Figure 2
Attention: For OLX-(24,30)wr-1 Log Sets, Pin #9 will not be used.
