31792-4-1115
Page 35
REMOTE INSTRUCTIONS
MAN
AUTO
PILOT
1
4
7
2
3
5
6
8
9
10
11
12
13
14
15
16
6
Index
No.
Description
1
Remote function mode symbols
(MANUAL - AUTOMATIC - PILOT)
2
Symbol for remote communication to fireplace
3
Keypad lock symbol. This symbol appears when keypad is
locked.
4
Low battery symbol. When this symbol appears without
flashing, the batteries must be replaced.
5
The temperature currently measured by the remote con-
trol’s built-in sensor for the area around the remote control.
6
Temperature units of measurement
(Celsius - Fahrenheit).
7
Symbol identifying room temperature measured by the
built-in sensor.
8
The thermostatic mode set temperature. This symbol does
not appear in MANUAL mode.
9
Clock. The clock functions as a countdown when the
SLEEP function is in use.
10
Symbols indicating the current day.
11
TIMER symbol. If this symbol does not appear, the TIMER
is not active. If only the outline of the symbol appears, the
TIMER is active. A solid black symbol indicates that you are
in the TIMER setting menu.
12
SLEEP function symbol. If this symbol does not appear, the
SLEEP function is not active. If only the outline of the
symbol appears, the SLEEP function is active, meaning
that the stove will switch off at the end of the countdown
period set by the user and shown by symbol 9. A solid black
symbol indicates that you are in the SLEEP setting menu.
13
Flame symbol, indicating the current flame power. If flame
power is at level 5, the MAX message also appears.
14
Clock setting symbol. When this symbol appears, you can
adjust the clock setting displayed by the digits 9.
15
Flame power bars: one bar = low, five bars = high. These
bars only appear when the stove is in MANUAL mode.
16
Digits identifying the weekly TIMER program currently
selected.
Figure 50 - The Remote Control Display
NOTE: The program symbol
, sleep symbol
, and
flame symbol
can appear in two ways: Solid black or Outline
Solid symbols indicate that you are currently in that function’s set-
ting menu.
For example, If the sleep symbol
appears in solid black,
you are currently in the sleep timer setting menu and can use the
up and down button (E in Figure 51 )to change the sleep timer.
E
Figure 51
Outline symbols mean that the function is active but that settings
cannot be changed unless you first enter the setting menu. When
you enter the setting menu, the symbol turns solid black again.
For example, If the sleep symbol appears only in outline, the sleep
timer is active and functioning.
Battery Type and Replacement
The batteries are housed in the base of the remote control. The
device requires 3 AAA 1.5V batteries. The Low Battery Symbol
on the remote control display tells you when the batteries
are running out. If the low batteries symbol
appears, the
batteries are nearly discharged and the remote control is about to
lose power.
ATTENTION
The batteries may need to be replaced frequently due to the
remote control’s multiple functions.
CAUTION
When replacing the batteries, take care to respect the polarity
symbols inside the remote control’s battery compartment.
