28091-8-0814
Page 23
• Press
(both buttons) and hold for 5 seconds (until
screen blinks) to enter Programming Mode.
• Press
(down) to scroll through menu items.
• Press
(up) to adjust menu items.
SETTING °F OR °C
1. Press
(up) button to choose either °F or
°C.
• Press
(down) button to set and scroll to
the next menu item.
SETTING 12 HOUR OR 24 HOUR MODE
2. Press
(up) button to choose either “12”
or “24.”
• Press
(down) button to set and scroll to
the next menu item.
SETTING THE HOUR
3. Press
(up) button to set the Hour, 1-12
or 0-23 then cycle back to 1 or 0.
• Press
(down button to set and scroll to
the next menu item.
SETTING THE MINUTES
4. Press
(up) button
to set Minutes, 00-59.
NOTE: Use right (up) button only. Numbers scroll
up (1,2,3...) to 56 then cycle back to 00.
• Press
(down) button to set and scroll to
the next menu item.
SETTING CHILD SAFETY LOCK
5. Set Child Safety Lock either ON or OFF.
• Press (up) button to set Child Safety Lock ON
(icon showing) or OFF.
6. This concludes your basic programming. The remote will
automatically save your changes and go into operation
mode afet 15 seconds of inactivity.
Or you can go into Timer Mode Programming.
Press (down) button to set and scroll to the next menu item.
This will enter you into Timer Mode Programming.
INITIAL SETUP - PROGRAMMING MODE
TIMER PROGRAMMING MODE
NOTE:
Use (up) button only to adjust menu items. Numbers scroll up to
the highest setting and then cycle back to the beginning number. Tem-
perature setting cycle back to OFF or pilot(“--”)
SETTING “ON” TEMPERATURE
1. Press
(up) button to set ON temperature for
BOTH Timer 1 and 2 (Sun icon visible).
• Press
(down) button to set and scroll to the
next menu item.
SETTING “OFF” TEMPERATURE
2. Press
(up) button to set OFF tempera-
ture for BOTH Timer 1 and 2 (Moon icon visible).
NOTE:
OFF temperature can not be set higher than your
ON temperature.
• Press
(down) button to set and scroll to the
next menu item.
SETTING TIMER 1 “ON” TIME
3. Set Timer 1 ON time
• Press
(up) button to set ON time (scrolls in 15
minute increments).
• Press
(down) button to set and scroll to the
next menu item.
SETTING TIMER 1 “OFF” TIME
4. Set Timer 1 OFF time.
• Press
(up) button to set OFF time (scrolls in
15 minute increements).
• Press
(down) button to set and scroll to the
next menu item.
SETTING TIMER 2 “ON” TIME
5. Set Timer 2 ON time.
• Press
(up) button to set ON time (scrolls in 15
minute increments).
• Press
(down) button to set and scroll to the
next menu item.
SETTING TIMER 2 “OFF” TIME
6. Press
(up) button to set OFF time (in 15 min-
ute increments).
• Press
(down) button to set and scroll tot he
next menu item.
7. This concludes programming Timers 1 and 2. The remote will au-
tomatically save your changes and go into operation mode after 15
seconds of inactivity.
GV34 REMOTE CONTROL INSTRUCTIONS
