28091-8-0814
Page 22
THERMOSTATIC/TIMER HANDSET FEATURES
R300 Thermostatic / Timer Models,
Patented
R300 Thermostatic / Timer Models
Icons
WARNING
Important! Refer to gas fire manufacturer’s operating instructions before
use.
LCD Icon
Feature and Description
Timer OFF Temperature Icon and Sleep Mode. After 8
hours of no signal between the handset and the receiv-
er, valve runs to pilot and Sleep Mode icon is displayed.
Timer ON Temperature Icon
Timer1 and Timer2: Uses Timer ON and Timer OFF
Temperatures at specific times set by user.
Temperature Range Indicator: Indicates handset is in
Thermostatic Mode (if Sun and Moon icons are also
present, indicates handset is in Timer Mode).
Ambient Temperature Display: Indicates the current
room temperature. °F or °C
Child Safety Lock: When ON (icon showing), the right
button must be pushed twice within 0.5 seconds to in-
crease flame height.
Battery Life Indicator: 4 bars indicates a fully charged
battery.
Clock Mode: Set to 12 or 24 hour clock.
Communication Indicator: Indicates the handset is
transmitting to the reciever.
TEMPERATURE RANGE INDICATOR
Indicates set point temperature is within this range:
Indicator Bars
1 bar: 40°F to 50°F (4°C to 11°C)
2 bars: 51°F to 60°F (11°C to 16°C)
3 bars: 61°F to 70°F (16°C to 22°C)
4 bars: 71°F to 80°F (22°C to 27°C)
5 bars: 81°F to 90°F (27°C to 37°C)
SLEEP MODE
After 8 hours off no signal between the handset and receiver, valve runs
to pilot and
Sleep Mode Icon is displayed.
INITIAL SETUP
Radio Frequency Remote
A code is selected automatically for all Mertik Maxitrol electronics from
among 65,000 random codes available.
On initial and subsequent receiver battery changes, the receiver has to
learn the code of the handset:
•
Power up Handset.
•
Power up Receiver (LED blinks).
•
While blinking, press any button.
•
When the Receiver LED stops blinking, the code is set.
NOTE:
These remote handset and receiver are not interchangeable
with previous versions. For all lighting instructions
please refer to appliance manufacturer‘s instructions.
CHANGING THE MODE OF OPERATION
Press and release both buttons
to change the mode of opera-
tion (in operating mode) in the following order:
•
Manual Mode
•
Thermostatic MOde
•
Timer Mode
1. Press and release both buttons
.
•
Manual Operating Mode. Ambient temperature is shown along
with battery life indicator, and the current time.
2. Press and release both buttons
.
•
Thermostatic Operating Mode. Ambient temperature is shown
along with battery life indicator, temperature range indicator,
and the current time.
3. Press and release both buttons
.
•
Timer Mode. Ambient temperature is shown along with battery
life indicator, temperature range indicator, the current time, and
either Timer ON (sun) or Timer OFF (moon) visible.
GV34 REMOTE CONTROL INSTRUCTIONS
NOTE:
This remote is for use on VFXV Models ONLY.
