![background image](http://html1.mh-extra.com/html/empire-comfort-systems/vflb36fp30n/vflb36fp30n_installation-instructions-manual_2404000020.webp)
42929-2-0721
Page 20
Empire Comfort Systems Inc. • Belleville, IL
Figure 28
23. Using gloves,
unstretch the 6" diameter flex venting from
the SD6DFA25 Flex Vent kit.
CAUTION
Due to sharp edges and the weight of the assembly,
please use proper eye protection and gloves to reduce
the potential for injuries.
24. Measure and cut the Flex-Vent length that runs from
the HMFA-P 6" duct connector installed in step 9 to the
Forced Air Kit Termination.
25. Attach and secure the each end of the Flex-Vent with 7"
diameter gear clamps provided in the SD6DFA25 Flex-
Vent Kit.
See Figures 28 and 29.
6” DIA 3-WAY
“Y” CONNECTOR
SELF DRILLING SCREWS
(3) PLACES
BAND CLAMP
COLLAR
FLANGE, COLLAR
PARTS FROM HMFA FORCED AIR KIT NOT USED
FLEX VENT KIT-SD6DFA25
(NOT INCLUDED IN HMFA(36,48,60,72)P KIT)
INCLUDES 25’ OF FLEX WITH (2) CLAMPS
6” DOVETAIL CONNECTOR
(INCLUDED IN HMFA(36,48,60,72)P
VF HEAT TRANSFER KIT)
BAND CLAMP
(INCLUDED IN HMFA
TERMINATION KIT)
6” FLEX
VENT
6” DIA 3-WAY
“Y” CONNECTOR
SELF DRILLING SCREWS
(3) PLACES
BAND CLAMP
COLLAR
FLANGE, COLLAR
PARTS FROM HMFA FORCED AIR KIT NOT USED
FLEX VENT KIT-SD6DFA25
(NOT INCLUDED IN HMFA(36,48,60,72)P KIT)
INCLUDES 25’ OF FLEX WITH (2) CLAMPS
6” DOVETAIL CONNECTOR
(INCLUDED IN HMFA(36,48,60,72)P
VF HEAT TRANSFER KIT)
BAND CLAMP
(INCLUDED IN HMFA
TERMINATION KIT)
6” FLEX
VENT