![background image](http://html1.mh-extra.com/html/empire-comfort-systems/vflb36fp30n/vflb36fp30n_installation-instructions-manual_2404000007.webp)
42929-2-0721
Page 7
Empire Comfort Systems Inc. • Belleville, IL
HMFA(36,48,60,72)P HEAT TRANSFER KIT
TOOLS/SUPPLIES NEEDED FOR HMFA(36,48,60,72)P:
• Electric Drill
• 1/8" Drill Bit
• 5/16" Nut Driver
• Aluminum Tape
HMFA(36,48,60,72)P INTRODUCTION
The Vent-Free Heat Transfer Kit (HMFA-P) is designed to be
installed on VFLB Fireplaces only and used in conjunction
with the HMFA Forced Air Management System to reduce the
amount of heat produced during operation of the fireplace.
CONTENTS OF HMFA(36,48,60,72)P:
1. Duct Inlet Assembly (1 ea.)
2. 6" Dovetail Connector (1 ea.)
3. Gusset (4 ea.)
4. Top Framing Bracket (2 ea. 36 & 48), (4 ea. 60 & 72)
NOTE:
Flex venting is not included with HMFA kit. Please
order the SD6DFA25 Flex Vent Kit which includes 25' of Flex
Vent and (2) Band clamps to complete the system installation.
NOTE:
If a television is to be mounted above the fireplace,
the HMFATV TV Kit MUST be used.
WARNING
HMFA Blower MUST be mounted on an exterior wall.
DO NOT transfer heat to an interior space.