background image

32274-0-0713

Page 3

• 

Installer: please leave these instructions with the owner for 

future reference

• 

This unit complies with ANSI Z21.97/CSA 2.41 and CSA 4.96 

U.S. for Outdoor Gas Fireplaces.

• 

Children and adults should be alerted to the hazard of high 

surface temperature and should stay away to avoid burns 

or clothing ignition.

• 

Young children should be carefully supervised when they 

are in the same area with the appliance.

• 

Clothing or other flammable materials should not be hung 

from the appliance, or placed on or near the appliance.

• 

Installation and repair should be done by a QUALIFIED 

SERVICE pERSON.  This appliance should be inspected 

before use and at least annually by a professional service 

person.  More frequent cleaning may be required due to 

insects, pollen build up, dust, etc.  It is imperative that 

the control compartments, burners, and circulating air 

passageways of the appliance be kept clean.

• 

Do not place trash, logs, or other articles on the log set 

during operation.

• 

During manufacturing, fabricating and shipping, various 

components of this appliance are treated with certain oils, 

films or bonding agents.  These agents are not harmful, but 

may produce annoying smoke and smells as they are burned 

off during initial operation of the appliance.  This is a normal 

temporary occurrence. 

• 

WARNING: Keep appliance area clear and free from 

combustible materials, gasoline and other flammable vapors 

and liquids.

• 

WARNING: Any modification to this gas log set or to controls 

can be dangerous.  Improper installation or use of the gas 

log set can cause serious injury or death from fire, burns, 

explosion or carbon monoxide poisoning.

• 

Follow all local codes regarding installation, combustion 

and ventilation air or in the absence of local codes follow 

the National Fuel Gas Code ANSI Z223.1 (US installation), or 

CAN/CGA-B149, installation Code (Canada installation).

• 

Do not operate this log set with glass doors in the closed 

position. A fireplace screen must be in place when the log 

set is burning.

• 

Inspect the hose before each use of the appliance. 

• 

The hose assembly must be replaced prior to the ap-

pliance being into operation if there is evidence of ex-

cessive abrasion or wear, or if the hose is damaged. 

• 

Inspect the burner at least once a year.

IMpORTANT SAFETY INFORMATION

DO NOT OpERATE THIS GAS LOG SET WITH GLASS DOORS CLOSED.

DANGER

: Indicates a hazardous situation which, if not 

avoided, will result in death or serious injury. 

WARNING

: Indicates a hazardous situation which, if 

not avoided, could result in death or serious injury.

CAUTION

: Indicates a hazardous situation which, if not 

avoided, could result in minor or moderate injury.

NOTICE

: Addresses practices not related to personal in-

jury.

•  Children and adults should be alerted to the hazards of 

high surface temperatures and should stay away to avoid 

burns or clothing ignition.

•  Young children should be carefully supervised when they 

are in the same area as the appliance.

•  Clothing or other flammable material should not be placed 

on or near the appliance.

• 

Do not place trash or other articles on the log set during 

operation.

•  During manufacturing, fabricating and shipping, various 

components of this appliance are treated with certain oils, 

films or bonding agents. These bonding agents are not 

harmful but may produce annoying smoke and smells as 

they are burned off during initial operation of the appliance. 

This is a normal temporary occurrence.  

•  Keep burner and control compartment clean. 

• 

Installation and repair should be done by a QUALIFIED 

SERVICE pERSON. The appliance should be inspected 

before use and at least annually by a qualified service 

person. More frequent cleaning may be required due to 

excessive lint from carpeting, bedding materials, etc. It 

is imperative that control compartments, burners and 

circulating air passageways of the appliance be kept 

clean.

•  Do

 keep the appliance area clear and free from combustible 

material,  gasoline  and  other  flammable  vapors  and 

liquids.

• 

A yearly examination and cleaning of the venting system 

of the solid-fuel burning fireplace must be performed by 

a qualified agency.

•  Do 

make a periodic visual check of pilot and burners. 

Clean and replace damaged parts.

•  Do NoT 

use this appliance if any part has been under 

water.  Immediately  call  a  qualified  service  technician 

to inspect the appliance and to replace any part of the 

control system and any gas control which has been under 

water. 

Summary of Contents for OLP36FP72S-2

























Reviews: