background image

OUTDOOR LINEAR 

GAS FIREPLACE 

MODELS:

OLL60FP12S(N,P)-2

OLL60SP12S(N,P)-2

INSTALLER: 

Leave this manual with the appliance.

CONSUMER: 

Retain this manual for future reference.

 

WARNING

For Outdoor Use Only.

 

WARNING

If the information in these instructions are 

not followed exactly, a fire or explosion may 

result causing property damage, personal 

injury or loss of life.

 

WARNING

If not installed, operated and maintained in 

accordance with the manufacturer's instructions, 

this product could expose you to substances in 

fuel or from fuel combustion which can cause 

death or serious illness.
Installation and service must be performed 

by a qualified installer, service agency or the 

gas supplier.

 

DANGER

FIRE OR EXPLOSION HAZARD

If you smell gas:

1.  Shut off gas to the appliance.

2. 

Extinguish any open flame.

3.  If odor continues, leave the area 

immediately.

4.  After leaving the area, call your gas 

supplier or fire department.

Failure to follow these instructions could 

result in fire or explosion, which could cause 

property damage, personal injury, or death.

 

WARNING

Improper installation, adjustment, alteration, 

service or maintenance can cause injury or 

property damage. Read the installation, operating 

and maintenance instructions thoroughly before 

installing or servicing this equipment.

 

WARNING

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.
An Propane-cylinder not connected for use 

shall not be stored in the vicinity of this or any 

other appliance.

DANGER

CARBON MONOXIDE HAZARD

This appliance can produce carbon monoxide 

which has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space 

such as a camper, tent, car or home.

GAS-FIRED

INSTALLATION INSTRUCTIONS

AND OWNER’S MANUAL

Page 1

Summary of Contents for OLL60FP12SN-2









































































Reviews: