![background image](http://html1.mh-extra.com/html/empire-comfort-systems/ol48tp10p-1/ol48tp10p-1_installation-instructions-and-owners-manual_2403955022.webp)
37795-3-0119
Page 22
PROPER LIGHTING POSITION
PROPER LIGHTING POSITION
Figure 31
NEVER LEAN
OVER FIREPIT
WHEN LIGHTING BURNER
NEVER LEAN OVER FIREPIT
WHEN LIGHTING BURNER
Figure 32
WaRninG
NEVER operate firepit with an optional weather cover in place.
In normal operation on high after 10 to 15 minutes, the flame ap-
pearance should be several tongues of yellow flames.
NOTICE:
All flames will be random by design, flame height will go
up and down.
During manufacture, fabricating, and shipping, various components
of this firepit are treated with oils, films, or bonding agents. These
are not harmful, but may produce smoke and smells as they are
burned off during the initial operation of the firepit. This is normal.
The initial break-in operation should last 2-3 hours with the burner
at the highest setting. Any odors remaining after this initial break-in
will disappear with continued use.
Flames from the main burner should be visually out before the
weather cover is installed.
If burner flame pattern is incorrect
• See Troubleshooting, page 26.
Flame pattern
The main burner flame will be mostly yellow.
Main BURneR FlaMe cHaRacTeRiSTicS
Flame ignition and extinction
When the main burner is ignited it may take up to a minute for the
full flame pattern to develop.
When the main burner is extinguished it may take up to a minute for
the flames to disappear. It is normal to have the flames burn down
near the burner, as the remaining gas is burned.
YELLOW
FLAME
BLUE
FLAME
Figure 33 - correct Flame propane
YELLOW
FLAME
BLUE
FLAME
Figure 34 - correct Flame natural
SHORT
BLUE FLAME
Figure 35 - incorrect Short Blue Flame
TALL
YELLOW FLAME
Figure 36 - incorrect Tall Yellow Flame