![background image](http://html1.mh-extra.com/html/empire-comfort-systems/ls40stb/ls40stb_installation-instructions-manual_2403880005.webp)
41016-1-0820
Page 5
NOTE:
Install liners before logs. See separate Liner Installation
manual for details.
CAUTION
Do not handle these logs with your bare hands. Always
wear gloves to prevent skin irritation from ceramic fibers.
After handling the logs, wash your hands gently with soap
and water to remove any trace of fibers.
Accessing the Interior of the Fireplace
See Homeowners Manual for instruction on how to remove the
barrier screen and glass door.
Log Set Installation
The positioning of the logs is critical to the safe and clean
operation of this fireplace. Sooting and other problems may
result if the logs are not properly and firmly positioned in the
fireplace. Please refer to
Figure 1
and the following
WARNING
when completing log placement instructions. For step by step log
placement instructions,
(See Pages 5 - 21).
WARNING
Failure to position the parts in accordance with this diagram
or failure to use only parts specifically approved with this
fireplace may result in property damage or personal injury.
Burner Pin Location
Figure 1
Glowing Embers Information
1. Carefully separate the ember material into small amounts
(no larger than “dime-size” pieces).
a. Fluffed up pieces of ember material one layer thick
will produce the best ember glow. Do not place more
than one layer of ember material onto the burner.
Excess ember material will decrease the ember
glow
effect.
b. Save any remaining ember material for future
applications (as needed).
Glowing Ember Location
Figure 2
Video of log installation available on our website at:
www.empirecomfort. com.
LOG AND EMBER PLACEMENT
Summary of Contents for LS40STB
