37709-2-0220
Page 4
Empire Comfort Systems Inc. • Belleville, IL
8. Remove ten screws and lift burner base assembly. Disconnect
gas line. Retain burner and screws for reassembly.
See
Figure 12.
Figure 12
9. Remove the four #10 X 1/2" screws securing the latch
assembly to the underside of the firebox and set aside.
See
Figure 13.
Figure 13
10. Install blower through burner cutout.
See Figure 14.
Figure 14
11. The blower plate is on the left side of the fireplace. Slide the
blower up into the tabs, securing it into place with the velcro.
See Figure 15.
Figure 15
12. Reinstall the latch assembly removed in step 9.
See Figure 13.
13. Install thermo disc by snapping it into bracket under the
burner assembly.
See Figure 16.
Figure 16
14. Turn gas on, check for leaks. Reinstall the burner base
assembly and ten screws removed in step 8.
See Figure 12.
15. Reinstall the burner and four screws removed in step 7.
See Figure 11.
16. Reinstall the log support and secure it with the metal plate and
two screws removed in step 6.
See Figure 10.
17. Replace burner cover removed in step 5.
See Figure 9.
18. Replace liner and bracket, if removed in step 4.
19. Replace log set and decorative media.
20. Turn on power.
21. Reinstall the glass frame removed in step 3.
See Figure 7.
22. Secure the glass frame with the latches at the bottom of the
fireplace.
See Figure 6.
23a. Replace barrier screen removed in step 1a.
See Figure 4.
23b. Replace lower panel removed in step 1b.
See Figure 5.
Back side of Blower
showing Velcro
Back side of Blower
showing Velcro
Back side of Blower
showing V
elcro
Back side
of blower
showing
Velcro