37709-2-0220
Page 2
Empire Comfort Systems Inc. • Belleville, IL
AFTER FIREPLACE IS INSTALLED IN THE WALL
ATTENTION: Do not handle barrier screen or door assembly
with bare hands! (Always wear gloves)
1a.
(Post 2016)
Make sure power and gas are turned off prior to
any removal. Lift barrier screen assembly and pull away from
the unit.
See Figure 4.
Figure 4
1b.
(Pre 2016)
Make sure power and gas are turned off. Tilt
and pull lower panel to remove from bottom assembly.
See
Figure 5.
If applicable, remove safety barrier screen covering the
glass.
Figure 5
2. Undo two latches at the bottom of the firebox assembly.
See Figure 6.
Figure 6
3. Disengage glass frame by pulling in upward swinging position.
Place glass frame aside in a safe and out-of-the-way location.
See Figure 7.
Figure 7
