37709-2-0220
Page 5
Empire Comfort Systems Inc. • Belleville, IL
DVCX MODELS
BLOWER INSTALLATION
(AFTER INSTALLED IN WALL)
1. Make sure power is turned off. Tilt and pull lower panel to
remove from bottom assembly.
See Figure 17.
Figure 17
If applicable, remove safety barrier screen covering the glass.
2. Pull latches toward you and down to release.
See Figure 18.
Figure 18
3. Pull glass out at the bottom, then lift up and off.
See Figure 19.
Figure 19
4. Install blower through bottom opening.
See Figure 20.
Figure 20
5. The blower plate is on the left side of the fireplace. Slide the
blower up into the tabs. Secure it into place with the Velcro
at the bottom.
See Figure 21.
Figure 21